I read a post from Harmonic Energy Works which talks about digital radionics, based on computer software, but also on so many other aspects, and I loved to read this post. “Read at your own risk” … indeed! It tastes like a good absinthe.
Daniel, you are right! Your phrase “I also have a criticism of how people think of them and how they may affect radionics” hits the nail on the head. I often receive feature requests for my AetherOnePi, a free open source radionics software, that I would rather not implement, because of the reason that it removes the operator from the context of the radionic process.
There is a common mindset among some people to kind of automate and systemize radionics. And an instrument like these can be used to just run all the time and keep everything balanced so you don’t have to worry about it. People get enamored with all that the software can do. But this leads to a problem in my opinion. This runs the risk of making people lazy and taking them out of the radionic process.
Radionics is a consciousness driven technology. It does not matter if digital or analog, as long as the operator is involved in the process. When I was developing the old software AetherOne under my old nickname Ken Martin (with the Arduino as output and TRNG / HOTBITS generator) the analysis feature was triggered just by one click on a button ANALYSIS. That’s it. The result was ok for me, not fantastic, but ok. Then Stella approached me and gave me a lot of design ideas. One of the most important ones was to check the general vitality of each rate inside the analysis result one by one by clicking an additional button “GV”. After this additional function, the operator was even more involved in the analysis process then before. Previously it consisted only of clicking one button, afterwards it was a click for each rate. Now one could argue, ok this is not really a huge improvement. That might be true for a beginner. But an advanced radionics practitioner focus and observe the effect each click has for each rate.
As you can see in the screenshot above, I was really drinking absinthe, so the analysis showed it “loud and clear“. On the right column you see “GV” which shows the “general vitality” of each rate. This values was analyzed “one by one, one after another” and the focus and intention builds up a tension between collective subconsciousness and the macroscopic world, high enough in order to produce the result.
Compared to analog radionics, the approach is to involve the operator in most of the steps, forcing his / her focus and intention formulation to be very clear. I could build in even more steps, but practice showed that this was more than sufficient, … yes Stella, this small detail only.
The feature that are dangerous in my eyes regarding the “keeping the operator in radionics” is the AUTO MODE I build in. This mode works very good for me, BECAUSE I’m the software developer, the inventor, the alchemist who finished the great work. All my thoughts and ideas are bound to the software (and hardware if I use the Arduino or RasperryPi in conjunction). There are thoughtforms squished out of my soul waiting to receive my commands and execute them.
I believe that when someone use software for radionics, it will only work well if they already have in their mind a vision of how it should work. Their vision will resonate and connect / link to the morphic field or thoughtform the maker generated for this application. This implies some sort of “respect and gratitude“, else the thoughtform will eventually “draw back” from the operator and the analysis and broadcasting will not work at all. I have seen this so many times. In particular there is one user who was so fascinated by the software, that he did not use his analog devices anymore, because he could feel “the power” (his words) of the software.
Good design in radionics applications and devices (some combine the analog and digital world) should always involve the operator and never ever exclude from the “radionic process“. A better basic training could obtain better results with every kind of device or software.
Some years ago (2005), I conducted a proving of a butterfly, the blue triangle butterfly or Graphium sarpedon choredon. The difference with this remedy to most other remedies was that we used a live butterfly. It had not undergone the death process and was set free afterwards. The remedy was made with the live butterfly, using a radionics box, 6c, on 17 April 2005, before freeing it into the rain forest.
Heidi Wedd, a post about butterly proving written for Hpathy
Radionics is the best way to capture the essence of the “raw material” for creating a remedy, because it does not hurt the animal and it is not dangerous for the maker of the remedy. Let me explain: there are materials that are dangerous to handle like radioactive materials. There are materials that cannot be handled at all in raw pure form, because they decay too fast or a fast natural oxidation process would make a trituration impossible. Pure carbon for example was made with radionics. In essence every imponderabilia is a radionic made remedy (I know some would disagree, but just think about it). A skilled radionic operator is able to produce every kind of remedy by connecting the device to the morphic field using cold scanning technique.
Two new feature that enhance the broadcast energy: the power switch and the multiplier.
POWER SWITCH
This setting broadcasts a rate endless. It will only stop if the operator clicks on the stop button inside the broadcast screen or exit the application.
Note that the setting “dynamic.adjustments” overrides the “power.switch”. You need to set it to false before using the power switch.
This feature should be used with some caution, because radionics tries to achieve balance. At some time the balance will be achieved, but if you continue to broadcast repeatedly, you will create a tension field inside the collective subconsciousness and this could lead to undesired effects. Use it with caution if a special case requires it.
MULTIPLIER
The multiplier … well it multiplies your intention … and you can feel the difference. Here again, use it with caution. The effect can be seen in the broadcast unit, the font size of the signature character becomes bigger. The default setting is 1.
Inside the BROADCAST screen there is a new textfield, where you can set the multiplier value.
Do you use the TRAINING [START] button? I bet you don’t even know it existed. And yet it is a very important feature of the digital radionics free software AetherOnePi.
How to use the Training Mode
First you get a clean session (right at the start of the software you have a new clean session, without any residual data of previous sessions).
Click on TRAINING[START]. A text will appear “TRAINING MODE …”. Now what happens inside the software is that it chose for you a remedy of the selected database. If you don’t select any database, it will be usually the Clarke Materia Medica of homeopathic remedies.
Now you can try to analyze which rate or remedy was chosen for you. You can use the software’s own features for analyzing, by just pressing CTRL key, or clicking on ANALYZE button and then check the GV of each rate.
Take a look at the screenshot here. This was my analysis of the remedy chosen in the training mode. I immediately recognized “cough” as main symptom. So whatever the chosen rate was from the software, it has to do with something that provokes a lot of cough.
When you are satisfied with your own analysis, press the button TRAINING [UNCOVER]. The name of the rate or remedy is then displayed on top of the buttons as you can see in the first screenshot.
This training was a success. The software’s choice for this training session was “Balsam of Peru”. Wikipedia says: It has four primary uses, like medicinal products such as cough medicine/suppressant.
The German language Wikipedia says: “In the Roman Catholic Church, Peru balsam was declared the official substitute for genuine frankincense for use in liturgy by a decree from Pope Pius V. This decision was made because frankincense used to be difficult to obtain and expensive. The scent produced when it is burned bears a slight resemblance to chocolate. However, the smoke from the balsam strongly irritates the respiratory system and can cause severe coughing.”
PSI / ESP Training
I thought recently on creating a specialized software for PSI training. It could track the progress of a student, generate random content, download custom made scenarios from other users and this is a lot of fun too.
Let me know in the comments what you thing about it!
Full Documentary on Chinese medicine, herbs, acupuncture and qi treatment.
I was treated many times with acupuncture. It is painless and the body seems to like it, like a massage. Friends told me that they treat their horses with acupuncture and they relax in the moment they see the needles, as if they know this is good for them.
What you can learn from the qi gong treatment is of special interest for the radionics practitioner.
H2O, the fascination of the liquid that almost, with high probability, with certainty, exists only here on our blue planet. It is the one substance most mentioned in the Bible, in the very beginning of the book till to the end. In the field of “alternative sciences” there are more researcher of water than anything else. In Australia there is the Joe Cell, in Austria “Grander water“, in Germany “levitated” water, in Italy “AcquaPhi“, and so on. Thousands of companies all around the world. They have one thing in common: they will tell you that somehow magnets, vortex structures and (if you pay for the beer they will tell you) INTENTION!
This is maybe the most honest, most free tutorial on the internet, that shows you the entire secret of energizing water. After that you will walk on water, build your own devices, and yes, energize your own water too.
How energized water tastes
If water was energized (by nature, a device or by a human) it always will lead to one outcome: you will drink the glass of water completely, till to the last drop. If it was not energized, for example simple water from plastic bottles, you will only “sip“, but not empty it. This is because of the lack of energy or structure. Or maybe because the water already contains information from the old pipes and you need to get rid of them first, to “erase the information” so to speak.
Energized water is recognizable for its good taste, electric in some way, removing bad taste from your mouth and also enhancing the taste of tea, coffee or soups.
How to energize
The most easy way to energize water is to hold the glass or bottle in your hands for a few minutes. Do not use plastic of any kind, because this material shields energy, it is made of organic chemical compounds, mostly carbon. Transparent glass is the best material. While you hold it in your hands it will be passively energized by your body’s energy field. Simple as that. The taste becomes a little bit better. But only a little bit.
Another way is the “Reiki” method, to hold your hands with a little distance of the glass and project energy into it. Again do this for a few minutes. The water will definitely taste better, more electric. It works especially well when the sun shines and you have got a night of good quality sleep.
You see the methods becomes more and more complex and difficult. But not too difficult.
The next method is to project actively an intention. For example you imagine energy coming from heaven, from an higher dimension, entering the atmosphere, until it reach your crown chakra and flows through your hands into the water. I tried different scenarios, images, intentions. Whatever works well for you, just play with it. The water begins to taste so good, that you just want to drink this kind of water.
A word of warning: do not use this method of water energizing if you are ill or depressed. You may energize the water with impure energy. No joke, this is serious. Just try to drink herb tea, take your medicine and get well before you energize water. In this case you can energize water by placing crystals inside a jar and place the jar in the sun.
Next step could be to imagine a plant, for example Calendula, and project this image into the water. Now I tried this a few times in the past and I must say it works. But a little bit too good. The water gets imprinted with the energy of the plant and if you are sensible to homeopathic remedies you will feel its typical characteristics and get even symptoms produced by the morphic field. So don’t use this method for the everyday water, but only if you know what exactly you are doing.
Extra power: energize the water for 3 minutes, pause for 10 minutes, energize again for 3 minutes, repeat until the glass of water begins to levitate.
Think about it: some people can prepare a meal with a few simple ingredients and it tastes fantastic. Others repeat the same receipt and it does not taste good at all. The technique and the procedure was the same. But somehow the intention of the expert is the key to the good taste.
Energize whiskey, wine, grappa, and then make a test with your friends. Tell them to taste the non-energized first and then the energized liquor. They will not believe you that it is the same. I tried this a few times. They always told me to give them “the good stuff I hide for special occasions“. Without their knowing the bottle was the same as always. The taste is a lot “softer” and sometimes I suspect that the manufacturers of the very good whiskey just take the cheap stuff and let it run through a water energizer. I also tried to enhance aspects of wine, to make the tannins taste stronger (bitter?), but it always tasted a lot “softer”. I would love to read also about your own experiences in the comments.
Another warning: yes, there are more dangers … DON’T OVERDO IT! Most of the energy you imply in energizing water may come from your own energy. A beginner in energetic arts is not able to distinguish between their own energy or the energy gathered from outer sources. When one begin to use the energy, one could become so fascinated, that they consume too much of their own energy. Read for example what was written regarding Qi Gong and TCM, about the jing. Just begin with 3 minutes a day and only after many weeks increase the practice. If you overdo it, you become exhausted and perhaps have not even one clue why, until you will remember what you read in this post or if someone else may point to it. I cannot stress this enough … just take it easy, begin with simple steps, small steps.
Create passive water energize devices
Next level is to create a thoughtform for energizing water and bind it to a device. The advantage are obvious: you get the work done without actively using your own energy and time.
There are two factors for success: creativity in designing the device, by binding the intention to the material realm and the energy used to create the thoughtform bound to the device. Remember this one fact, manufacturers mostly don’t even know that it is a thoughtform they created. They do it unconsciously and it still works. Only few manufacturers know exactly what they do and the results are a lot better.
The simplest design is a piece of paper with a symbol, a circle (on which you place a glass of water or a bottle) with something inside the circle that represents the intention of energizing the water. What could it be? For example a hexagram, maybe something that looks “scientific”?! Whatever works, works! Then use your hand to project the same energy to the symbol. After that place a glass of water on it, wait 3 minutes and see if it still works. Go to Amazon, search for water energizer and see how many of these so called devices are nothing else than a simple plate made of wood or plastic with a symbol on it. So easy, so simple. But I also know, most of these devices lost their juice, say their thoughtform, because they was placed in dusty and busy stores for a long time.
The next step is to become more creative: draw not only a symbol, but an entire lab of scientists who clean the water from energetic impurities (not physical ones, for that you need a filter) and energize the water on different levels. The drawing could be a kind of comic, a infographic, or a antique painting. If the drawing is really nice, protect it with plastic laminating.
Then after that, if you are bored and have a lot of time, go into 3D, buy a 3D printer, learn Blender, design crazy metaphysical stuff. There you are, …
Or take an amethyst quartz and use just that as a “device“.
Remember: these passive device will lose their “juice” with time. You need to recharge them from time to time.
From passive to dynamic water energizer
I imagine the perfect water energizer device with a micro-computer that use true random number generators for analyzing individual imbalances of the water and of whom will consume it. Then it will “broadcast” the energizing information with the use of LEDs, Lasers, Sound, Vibration, building vortexes with magnetism, sending electromagnetic frequencies and then it stops only after a final check of the energies are higher than that of the potential consumer.
A dynamic water energizer will not lose its “juice” so fast as the passive ones. This may be due the fact, that a lot more energy was invested in creating them.
1999 Amazon was accessible via Internet, through the wires of a standard telephone and a modem. The sound it made when it connected was like the computer talked to another computer in an Italian accent.
This was the time I was already researching PSI (without knowing that it was called PSI) and quantum mechanics and so many strange stuff. I also read a lot of books. This post will be the beginning of a series about book and DVDs about radionics and whatever I read about similar topics.
The Conscious Universe
Written 1999 by Menas Kafatos, this book is about quantum entanglement and how measurement (consciousness) change the outcome of the experiment. It is not a book for beginner, but not one for an expert either. Somewhere in the middle.
The Conscious Universe: The Scientific Truth of Psychic Phenomena
Dean Radin (who else) wrote this book back in 1997 and I devoured it (another alternative title of this book is “The Noetic universe”. It is though a book that talks a lot about statistics and TRNGs (true random number generators), but this is the foundation of digital radionics. I also recommend all the other books of Radin. Somehow he must have implanted some ideas into my mind.
The Dreaming Universe: A Mind-Expanding Journey Into the Realm Where Psyche and Physics Meet
Written by Fred Allan Wolf in 1995 and read by me when I still got hair on my head, this book was a must read back then because of my huge interest in lucid dreaming. But it was a surprise for me, that dreams somehow are indeed connected to the real world. Man I knew nothing!
The Science of Homeopathy
Written by the pope of homeopathy, George Vithoulkas, this book was my introduction into the immaterial. Whoever claims to be an expert in homeopathy and has never read this book is a blatant liar.
Additional recommendations are the books freely available on homeoint.org.
The Holographic Universe
A classic from the pre-internet era, a radical new view on the universe as a hologram, where every piece contains the whole again. Written by Michael Talbot 1991. This was for me an eye opener, a can opener for the brain.
The definition says: Catalysis is the process of increasing the rate of a chemical reaction by adding a substance known as a catalyst. Catalysts are not consumed in the reaction and remain unchanged after it. If the reaction is rapid and the catalyst recycles quickly, very small amounts of catalyst often suffice.
A good example for a catalyst is Platinum in automobiles, that helps convert harmful gases, such as carbon monoxide, nitrogen oxides, and unburned hydrocarbons, into less harmful substances like carbon dioxide, nitrogen, and water vapor.
Or another example are enzymes in biological reactions. They speed up processes like digestion, metabolism, and DNA replication. For example, the enzyme amylase helps break down starch into simpler sugars during digestion.
Electrolysis, the splitting of water into its components hydrogen and oxygen, is one of the processes most researched in the world. Platinum, Ruthenium and Nickel works as catalysts in electrolysis too. Without these catalysts the electrolysis would require a lot more energy.
Imagine that you could create a thoughtform and sustain it with the help of radionics, one that would work as a catalyst. After all, the definition says that it will not be consumed and it remains unchanged after the process. A chemical catalysts provides structure and structure is nothing else than information (in-form-ation).
These kind of experiments would not require expensive equipment. Just a mind willing to explore the boundaries of radionics. And the progress and success is easy to measure. The result could be used in your own household (naturally with some precaution, because its detonation gas we are talking about).
What most people are not aware of, is the fact that most of the water energizer on the market today have a thoughtform bound to it. Maybe not created willingly, that’s for sure. But the “scientist” (I would say hobby alchemist) who research water properties and how to enhance the “energy” of water, invest a lot of intention (yi) into their work. And this creates a thoughtform carrying out the will of its master.
After some time, these thoughtforms gets detached from their apparatus, especially if the device was sold to careless customers. Many manufacturers of these devices tell their customers that they cannot place these devices in the vicinity of strong electromagnets or chemical substances. It’s not the entire secret to keep them working. They need to respect the design and art of these devices, adding their own intention to them in order that they continue to work.
I know one hobby alchemist who produce small “upgrades”, plastic cards that are inserted into a slot into the device. These “upgrades” have a “program” (so they call it), that adds the energetic imprint of vitamins, minerals and other stuff to the device.
I bought once one of these device and it worked like a charm. The water tasted like electrical charged, a lot more “thinner”. After some years the device lost its “juice” and the water began to taste as normal water again. You know, this device has no water filter, so there should be (in theory) no part to be replaced. The problem was, a family member did not “respect” the device and placed garbage near it.
So I got an idea: why not produce my own thoughtform and implant it into (or to) the device?! Or could I just copy the thoughtform? The work invested in creating such a thoughtform is huge. I know the man who did it. He fantasied about water enhancer day and night, for years! This was his baby. But I know from homeopathy how easy it is to copy a morphic field. So this was my approach: I thought for one minute intensively about the inventor and how he hand me out the thoughtform on a piece of paper. I got a piece of paper on the table as a symbolic representation. Then I put a glass of water on the paper for 5 minutes. After that I dynamized the water to the C30 (water bottle method). And this water was inserted through the tubes into the device and remained inside for an entire night.
The result was a full success. Now imagine (because imagination is the spark of the art) that you could reach into the future, to a future part of yourself or someone else who was able to produce the one thoughtform that revolutionized energy production and you copy this morphic field and insert it into your electrolysis device. And then the device works a lot better, I mean, so good that technicians and scientists would think you cheat, hiding some extra energy source somewhere.
Radionics is able to do this. Just look at what Joe did with his “joe cell”, what Tesla did with some of his devices, what Stanley Meyer did and nobody could reproduce, because they lack the knowledge of the invisible, the immaterial and nonlocal.
Radionics 